Plx Wideband O2 Install Firefox

1/27/2018by
Plx Wideband O2 Install FirefoxPlx Wideband O2 Install Firefox

The DM-6 + SM-AFR Gen4 Gauge Combo is a tuner grade Bosch LSU 4.9 wideband oxygen sensor controller with 2 1/16' touch screen gauge. Accurately reads the air/fuel ratio of any internal combustion from 0.68 Lambda to 1.36 Lambda (10:1 - 20:1 AFR *Gasoline).

Fully plug and play, no sensor calibration is required. Compatible with Gasoline, Diesel, Ethanol, Methanol, E85, LPG, CNG. Accurate to 0.1AFR with less than 100mS reaction time from rail to rail. Advanced sensor health monitoring, displays oxygen sensor health and reaction time on the DM-6 gauge.

I have an AEM wideband gauge and bosch sensor. Can i just replace the origional o2 sensor with the bosch one and use one of the wires to go to the ecu?

The SM-AFR Gen4 is a tuner grade Bosch LSU 4.9 wideband oxygen sensor controller with digital/analog outputs for 3rd interface. Accurately reads the air/fuel ratio of any internal combustion from 0.68 Lambda to 1.36 Lambda (10:1 - 20:1 AFR *Gasoline). Fully plug and play, no sensor calibration is required. Compatible with Gasoline, Diesel, Ethanol, Methanol, E85, LPG, CNG. Accurate to 0.1AFR with less than 100mS reaction time from rail to rail. Advanced sensor health monitoring, displays oxygen sensor health and reaction time when connected to DM-6 gauge. The DM-6 Multi Gauge Display Module is an OLED automotive gauge designed to display the measured values from your PLX Sensor Modules.

Measuring only 0.7' (18 mm) thin, it can be mounted virtually anywhere. The DM-6 Multi Gauge is designed to fit into most aftermarket 2 1/16' (52 mm) cups, and can be mounted for seamless integration into your vehicle. Wolfteam Wolf Coin Hack Free Download here. Utilizing new touch screen sense technology, buttons are a thing of the past.

Navigate your gauge and menus with ease by touching the bezel of the gauge. An ideal accessory for your PLX Sensor Modules. Connect to a Multi Gauge with OBD II for even more information than any standard gauge. How To Install Pycairo Installer.

Genuine Bosch LSU 4.9 wideband oxygen sensor is a 5 wire sensor with a built-in calibration resistor with an M18 x 1.5 thread. This is the industry standard sensor for tuning internal combustion engines of various fuel types (gasoline, diesel, ethanol, methanol, LPG, CNG, E85). The wideband oxygen sensor is sometimes referred to as a lambda sensor or UEGO. It is the ideal sensor to be used with all PLX Wideband Controllers. Each sensor is hand tested by a PLX technician to verify its accuracy and precision. For use with PLX Gen4 or later Widebands ONLY. Compatible with PLX Devices Wideband Gen4 and later Compatible with Walker P/N 250-25036, 250-25075 Compatible with Bosch P/N,,.

Comments are closed.