Leviton Installation Manual For Residential Structured Wiring

1/13/2018by
Leviton Installation Manual For Residential Structured Wiring

My home had a small wiring enclosure in the hall closet. Download Guitar Rig 4. It contained a mess of telephone cable and coax for cable TV. It turned out that the phone cable was actually Cat-5 going to each phone outlet and I wanted to use this to distribute wired Internet to the outlets and in some rooms have wired Internet and phone. I wanted to have my cable modem, Ooma base station (which I use for phone service) and Internet router out of the way in the enclosure. Also in the closet was an existing alarm system and I wanted to move all of its wiring into the same enclosure. After some research, I settled on the On-Q system from Legrand. It is very modular and has a lot of parts that work together.

Step 1: Parts List. I got the largest enclosure they do, a 42' tall one. Be warned, this is not inexpensive. The total cost for the parts came to just under $1000 and I purchased all of the On-Q parts from 1 x OQEN4250 On-Q Enclosure with Hinged Door, 42 In. 1 x OQ36456902 On-Q Duplex Outlet Kit with Surge Protection 1 x OQ36426601 On-Q Power Strip Module 1 x OQ36490401 On-Q Universal Mount Plate, Full Width 2 x OQ36348601 On-Q 8-Port Network Interface Module 1 x OQCO1000 On-Q 6-Port Phone/Data Module 1 x OQDA1054 On-Q 4-Port Gigabit Router/Switch 1 x OQDA1008 On-Q 8-Port Gigabit Network Switch 2 x OQPW7760 On-Q Power Supply, 12VDC, 18W 1 x OQWP1000WH On-Q Pre-Configured Strap (Phone, Data & Blank), White Color: White You'll also want a number of Ethernet outlets - I used.

Resources and solutions for structured wiring, smart home, home automation, home wiring panels, systems, DIY networking kits, and Residential Wiring Cables - Cat5e / RG6.

Step 2: Tools. You'll need a bunch of tools for this project: * Utility/Stanley knife - for cutting into drywall and cutting wire sheath * Drywall saw - for cutting large openings in drywall * Gloves/mask/goggles * Electric drill and screwdriver * Assorted screwdrivers * Electrician's snips * Wire stripper * 110 Punchdown tool - I used * Assorted network cables - I got some 1' ones from Fry's for the patch panels and longer ones for testing * Nylon cable ties - for keeping things neat and out of the way * Network tester - I used and it was well worth it Step 3: Prepare the Area for the Enclosure. Warning: there are usually live wires running horizontally through studs in walls. Use a live wire detector (many stud finders have this function) to look for them to determine where to situate the enclosure.

Comments are closed.