Ibm System P5 Serial Connection Baud

4/19/2018by
Ibm System P5 Serial Connection Baud Rate

Hey All, Trying to connect to the Power5 9133-55A serial console using a serial-to-usb converter (RS232). The other end is connected via null modem. Tried minicom, putty and other Linux utilities, no luck. The serial device shows up as /dev/ttyUSB0. Tried 9600 8N1 XON/XOFF, no luck. There is simply no output on the screen and no change after pressing enter multiple times.

The 9133-55A is currently hooked up to an HMC and works fine that way but not via serial. Could someone who has done this via Linux nudge me along and let me know what settings you used? Going to retry with putty and windows as alot of the videos indicate and post if it was successful. Cheers, DH ---------- Post updated at 12:54 PM ---------- Previous update was at 12:41 PM ---------- Sorry for bad subject. Can a moderator please change it to 'Power5 9133-55A Serial Console connection issue'? I set the speed using the below after powering the P5 down: stty -F /dev/ttyUSB0 19200 stty -F /dev/ttyUSB0 Then connected via putty. Download Free Sol Invictus In The Rain Rar Extractor more.

Comments are closed.